PHP-函数 Ncurses

ncurses_addch — Add character at current position and advance cursor
ncurses_addchnstr — Add attributed string with specified length at current position
ncurses_addchstr — Add attributed string at current position
ncurses_addnstr — Add string with specified length at current position
ncurses_addstr — Output text at current position
ncurses_assume_default_colors — Define default colors for color 0
ncurses_attroff — Turn off the given attributes
ncurses_attron — Turn on the given attributes
ncurses_attrset — Set given attributes
ncurses_baudrate — Returns baudrate of terminal
ncurses_beep — Let the terminal beep
ncurses_bkgd — Set background property for terminal screen
ncurses_bkgdset — Control screen background
ncurses_border — Draw a border around the screen using attributed characters
ncurses_bottom_panel — Moves a visible panel to the bottom of the stack
ncurses_can_change_color — Checks if terminal color definitions can be changed
ncurses_cbreak — Switch off input buffering
ncurses_clear — Clear screen
ncurses_clrtobot — Clear screen from current position to bottom
ncurses_clrtoeol — Clear screen from current position to end of line
ncurses_color_content — Retrieves RGB components of a color
ncurses_color_set — Set active foreground and background colors
ncurses_curs_set — Set cursor state
ncurses_def_prog_mode — Saves terminals (program) mode
ncurses_def_shell_mode — Saves terminals (shell) mode
ncurses_define_key — Define a keycode
ncurses_del_panel — Remove panel from the stack and delete it (but not the associated window)
ncurses_delay_output — Delay output on terminal using padding characters
ncurses_delch — Delete character at current position, move rest of line left
ncurses_deleteln — Delete line at current position, move rest of screen up
ncurses_delwin — Delete a ncurses window
ncurses_doupdate — Write all prepared refreshes to terminal
ncurses_echo — Activate keyboard input echo
ncurses_echochar — Single character output including refresh
ncurses_end — Stop using ncurses, clean up the screen
ncurses_erase — Erase terminal screen
ncurses_erasechar — Returns current erase character
ncurses_filter — Set LINES for iniscr() and newterm() to 1
ncurses_flash — Flash terminal screen (visual bell)
ncurses_flushinp — Flush keyboard input buffer
ncurses_getch — Read a character from keyboard
ncurses_getmaxyx — Returns the size of a window
ncurses_getmouse — Reads mouse event
ncurses_getyx — Returns the current cursor position for a window
ncurses_halfdelay — Put terminal into halfdelay mode
ncurses_has_colors — Checks if terminal has color capabilities
ncurses_has_ic — Check for insert- and delete-capabilities
ncurses_has_il — Check for line insert- and delete-capabilities
ncurses_has_key — Check for presence of a function key on terminal keyboard
ncurses_hide_panel — Remove panel from the stack, making it invisible
ncurses_hline — Draw a horizontal line at current position using an attributed character and max. n characters long
ncurses_inch — Get character and attribute at current position
ncurses_init_color — Define a terminal color
ncurses_init_pair — Define a color pair
ncurses_init — Initialize ncurses
ncurses_insch — Insert character moving rest of line including character at current position
ncurses_insdelln — Insert lines before current line scrolling down (negative numbers delete and scroll up)
ncurses_insertln — Insert a line, move rest of screen down
ncurses_insstr — Insert string at current position, moving rest of line right
ncurses_instr — Reads string from terminal screen
ncurses_isendwin — Ncurses is in endwin mode, normal screen output may be performed
ncurses_keyok — Enable or disable a keycode
ncurses_keypad — Turns keypad on or off
ncurses_killchar — Returns current line kill character
ncurses_longname — Returns terminals description
ncurses_meta — Enables/Disable 8-bit meta key information
ncurses_mouse_trafo — Transforms coordinates
ncurses_mouseinterval — Set timeout for mouse button clicks
ncurses_mousemask — Sets mouse options
ncurses_move_panel — Moves a panel so that its upper-left corner is at [startx, starty]
ncurses_move — Move output position
ncurses_mvaddch — Move current position and add character
ncurses_mvaddchnstr — Move position and add attributed string with specified length
ncurses_mvaddchstr — Move position and add attributed string
ncurses_mvaddnstr — Move position and add string with specified length
ncurses_mvaddstr — Move position and add string
ncurses_mvcur — Move cursor immediately
ncurses_mvdelch — Move position and delete character, shift rest of line left
ncurses_mvgetch — Move position and get character at new position
ncurses_mvhline — Set new position and draw a horizontal line using an attributed character and max. n characters long
ncurses_mvinch — Move position and get attributed character at new position
ncurses_mvvline — Set new position and draw a vertical line using an attributed character and max. n characters long
ncurses_mvwaddstr — Add string at new position in window
ncurses_napms — Sleep
ncurses_new_panel — Create a new panel and associate it with window
ncurses_newpad — Creates a new pad (window)
ncurses_newwin — Create a new window
ncurses_nl — Translate newline and carriage return / line feed
ncurses_nocbreak — Switch terminal to cooked mode
ncurses_noecho — Switch off keyboard input echo
ncurses_nonl — Do not translate newline and carriage return / line feed
ncurses_noqiflush — Do not flush on signal characters
ncurses_noraw — Switch terminal out of raw mode
ncurses_pair_content — Retrieves foreground and background colors of a color pair
ncurses_panel_above — Returns the panel above panel
ncurses_panel_below — Returns the panel below panel
ncurses_panel_window — Returns the window associated with panel
ncurses_pnoutrefresh — Copies a region from a pad into the virtual screen
ncurses_prefresh — Copies a region from a pad into the virtual screen
ncurses_putp — Apply padding information to the string and output it
ncurses_qiflush — Flush on signal characters
ncurses_raw — Switch terminal into raw mode
ncurses_refresh — Refresh screen
ncurses_replace_panel — Replaces the window associated with panel
ncurses_reset_prog_mode — Resets the prog mode saved by def_prog_mode
ncurses_reset_shell_mode — Resets the shell mode saved by def_shell_mode
ncurses_resetty — Restores saved terminal state
ncurses_savetty — Saves terminal state
ncurses_scr_dump — Dump screen content to file
ncurses_scr_init — Initialize screen from file dump
ncurses_scr_restore — Restore screen from file dump
ncurses_scr_set — Inherit screen from file dump
ncurses_scrl — Scroll window content up or down without changing current position
ncurses_show_panel — Places an invisible panel on top of the stack, making it visible
ncurses_slk_attr — Returns current soft label key attribute
ncurses_slk_attroff — Turn off the given attributes for soft function-key labels
ncurses_slk_attron — Turn on the given attributes for soft function-key labels
ncurses_slk_attrset — Set given attributes for soft function-key labels
ncurses_slk_clear — Clears soft labels from screen
ncurses_slk_color — Sets color for soft label keys
ncurses_slk_init — Initializes soft label key functions
ncurses_slk_noutrefresh — Copies soft label keys to virtual screen
ncurses_slk_refresh — Copies soft label keys to screen
ncurses_slk_restore — Restores soft label keys
ncurses_slk_set — Sets function key labels
ncurses_slk_touch — Forces output when ncurses_slk_noutrefresh is performed
ncurses_standend — Stop using 'standout' attribute
ncurses_standout — Start using 'standout' attribute
ncurses_start_color — Initializes color functionality
ncurses_termattrs — Returns a logical OR of all attribute flags supported by terminal
ncurses_termname — Returns terminals (short)-name
ncurses_timeout — Set timeout for special key sequences
ncurses_top_panel — Moves a visible panel to the top of the stack
ncurses_typeahead — Specify different filedescriptor for typeahead checking
ncurses_ungetch — Put a character back into the input stream
ncurses_ungetmouse — Pushes mouse event to queue
ncurses_update_panels — Refreshes the virtual screen to reflect the relations between panels in the stack
ncurses_use_default_colors — Assign terminal default colors to color id -1
ncurses_use_env — Control use of environment information about terminal size
ncurses_use_extended_names — Control use of extended names in terminfo descriptions
ncurses_vidattr — Display the string on the terminal in the video attribute mode
ncurses_vline — Draw a vertical line at current position using an attributed character and max. n characters long
ncurses_waddch — Adds character at current position in a window and advance cursor
ncurses_waddstr — Outputs text at current postion in window
ncurses_wattroff — Turns off attributes for a window
ncurses_wattron — Turns on attributes for a window
ncurses_wattrset — Set the attributes for a window
ncurses_wborder — Draws a border around the window using attributed characters
ncurses_wclear — Clears window
ncurses_wcolor_set — Sets windows color pairings
ncurses_werase — Erase window contents
ncurses_wgetch — Reads a character from keyboard (window)
ncurses_whline — Draws a horizontal line in a window at current position using an attributed character and max. n characters long
ncurses_wmouse_trafo — Transforms window/stdscr coordinates
ncurses_wmove — Moves windows output position
ncurses_wnoutrefresh — Copies window to virtual screen
ncurses_wrefresh — Refresh window on terminal screen
ncurses_wstandend — End standout mode for a window
ncurses_wstandout — Enter standout mode for a window
ncurses_wvline — Draws a vertical line in a window at current position using an attributed character and max. n characters long